Belkin Mouse F8E841 BLK User Manual

MiniScrolle r™  
Mous e  
Us e r Ma nua l  
P73429  
F8E841-BLK  
 
Important Information  
The USB connector is compatible with  
USB Connector Windows® 98 and Windows® 2000.  
The PS/2 connector is compatible with  
Windows® 3.x, 95, 98, NT, and 2000.  
PS/2 Connector  
 
 
Introduction  
ABOUT YOUR MOUSE  
1.1 An Introduction to your new Belkin  
MiniScrollerMouse  
The Belkin MiniScrollerMouse offers you ease of use on the  
Internet, eliminating the need for scroll bars. You can scroll  
smoothly through your documents or Web Pages, browsing  
them more quickly and more efficiently. Imagine, with the  
simple movement of the scroll wheel, you can glide  
effortlessly through Web Pages and long documents, without  
having to remove your pointer from the document itself.  
Also, by eliminating this simple task, you can add to the  
lifetime of your mouse by reducing natural wear and tear.  
Not to mention the reduced tension on your wrist from  
excessive, repetitive movements. Internet surfing couldn't  
be easier!  
Once the software has been loaded onto your computer, the  
center button of your mouse (the scroll wheel) can be  
programmed to perform the same tasks as:  
"Left Button Double Click"  
"F1" through "F12"  
"Enter" Key  
"Page Up" Key  
"Page Down" Key  
"Home" Key  
"End" Key  
These can be used in place of your scrolling options.  
1
 
2. Hardware Installation  
2.1 Hardware Installation  
Your mouse connects to either a PS/2 mouse port  
or a  
Universal Serial Bus (USB) port . To check, look at the  
back of your computer for the port that is designated for your  
mouse. Some PCs will have the word MOUSE marked next to  
the PS/2 connector. If you are still unsure, please refer to your  
hardware manual.  
For USB mouse port installation, simply remove the PS/2-USB  
adapter from the end of the connector before plugging the  
mouse into the computer.  
PS/2 Installation  
a. Make sure that the computer is turned off.  
b. Locate the PS/2 mouse port on the back of your computer.  
c. Plug your mouse into the appropriate port suggested  
above. Check the box in which your mouse was shipped to  
verify the ports supported.  
d. Turn your computer on. At this point, your mouse will work  
with the built-in Microsoft® Operating System. To use the  
extra features of your middle button, you must install the  
included software.  
2
 
Hardware Installation (continued)  
USB Installation  
a. Locate the Universal Serial Bus (USB) port on the back of  
your computer.  
b. Plug your mouse into the port. Check the box in which your  
mouse was shipped to verify the ports supported.  
c. Sometimes, when connecting the mouse into a USB port,  
Windows will detect the mouse and start the Add New  
Hardware Wizard. If it does not, then go to d, below. If  
the Wizard does come up, follow the on-screen  
instructions.  
1. You may be prompted to insert the Windows®  
Software disk.  
2. Insert the disk into the CD-ROM.  
3. The drive and CD will come up automatically. Confirm  
that it is the current drive (for example: D:\).  
4. Then click “OK.  
5. The file needed to support the USB mouse will be  
copied to your computer.  
d. At this point, your mouse will work with the built-in Microsoft®  
Operating System. To use the extra features of your middle  
button, you must install the included software.  
3
 
1. Software Installation  
A step-by-step guide to getting your mouse set up  
Important: Before installing the MiniScrollersoftware, it is  
strongly recommended that you remove all other third party  
mouse drivers. DO NOT REMOVE THE WINDOWS® DEFAULT  
MOUSE DRIVERS.  
WARNING: To avoid damage, turn your computer off before  
plugging or unplugging any pointing devices.  
Windows® 95, Windows® 98 and Windows NT®  
4.0 Installation  
a. Insert the MiniScrollerdiskette in the A: or B: drive  
b. Click "Start" in the lower left corner of your screen  
c. Then click "Run"  
d. Type "A:setup" (or "B:setup") and then click "OK"  
e. Follow the on-screen instructions to complete the  
installation of the MiniScroller™  
f. To make the process run smoothly:  
1. Click "Next" two times  
2. Type in your name and the company's name,  
then click "Next"  
3. Click "Next" two more times  
4. Specify if you are using a USB or PS/2 connection  
(refer to section 2.1) then click "OK"  
5. Select "Yes, I want to restart my computer now" then  
click "Finish"  
4
 
3. Troubleshooting  
Q: When installing the software, which driver should I  
choose? The PS/2 Mouse on COM1 or Serial Mouse  
on COM2?  
A: If you are using a PS/2 mouse (refer to section 1.2) then  
the driver must state that it is using a PS/2 driver. If you  
are using a Serial mouse (refer to section 1.2) then the  
driver must state that it is using a Serial driver on COM1  
or COM2.  
Q: I can get into Windows® or into "Safe Mode" but I  
cannot use the mouse.  
A: If you have more than one driver, this could be causing  
your computer to boot in safe mode or not allow your  
mouse to work at all. If you are using a PS/2 mouse  
then the driver must state that it is using a PS/2 driver.  
If you are using a Serial mouse then the driver must  
state that it is using a Serial driver on COM1 or COM2.  
If you have a Serial Mouse and you are not sure whether  
you are using COM1 or COM2 then try moving the  
mouse to another serial port on the back of your  
computer, (most computers have two, if you have  
only one, it will more than likely be COM1). If you  
have more than one driver, you must remove the  
excess drivers.  
Q: If I have more than one mouse driver how do I  
remove the driver without the mouse control? How  
do I boot into normal Windows® mode?  
A: Use your "Windows®"Key at the bottom left hand  
corner of your keyboard if you have one; if not, press  
5
 
3. Troubleshooting (continued)  
"Alt + S" to go to the "Start" button in Windows® 95.  
Then use your "Up" Arrow to select "Settings", then use  
your "Right" Arrow to select "Control Panel", and then  
press "Enter".  
These steps have taken you to the "Control Panel" where  
you can gain access to your "Device Manager". The  
"Device Manager" shows your driver status  
and information and it will allow you to modify  
their settings.  
After entering the "Control Panel" use your "Up" and  
"Down" Arrows to select "System" and then press  
"Enter". After entering "System Properties" use your  
"Right" Arrow to select "Device Manager". Then press  
Tab until you have selected "Computer" and then use the  
"Down" Arrow until your "Mouse" is highlighted. Then  
use your "Right" Arrow to expand and select your mouse  
driver or drivers.  
After you have chosen your mouse driver you can now  
modify it by removing the driver or changing the driver.  
To remove the driver you have selected, use your "Tab"  
key until the "Remove" tab is selected. Then press  
"Enter". This will remove the driver. Use your "Arrow" Key  
to select any other drivers and repeat the process until all  
but one driver remains. Even if it is the wrong driver you  
can use it and change it to the mouse driver you want.  
After removing or changing the mouse driver, use your  
"Tab" key until "Close" is selected and then press "Enter".  
6
 
3. Troubleshooting (continued)  
Then you will have to reboot your computer.Use your  
"Windows®"Key at the bottom left hand corner of your  
keyboard if you have one; if not, press "Alt + S". Then  
use the "Up" Arrow to select "Shut Down" and use  
your "Enter" key. Use your "Arrow" Key to select  
"Restart" and press "Enter".  
Q: After installing the mouse driver and rebooting, my  
mouse will not work. How do I change the mouse  
driver without mouse control?  
A: Use your "Windows®"Key at the bottom left hand  
corner of your keyboard if you have one; if not, press  
"Alt + S" to go to the "Start" button in Windows® 95.  
Then use your "Up" Arrow to select "Settings" then use  
your "Right" Arrow to select "Control Panel" and then  
press "Enter".  
These steps have taken you to the "Control Panel"  
where you can gain access to your "Device Manager".  
The "Device Manager" shows your driver status and  
information and it will allow you to modify their settings.  
After entering the "Control Panel" use the "Up" and  
"Down" Arrows to select "System" and then press  
"Enter". After entering "System Properties" use the  
"Right Arrow" to select "Device Manager". Then press  
"Tab" to bring your selection to "Computer" and then  
use the "Down" Arrow until your "Mouse" is  
highlighted. Then use your "Right" Arrow to expand  
and select your mouse driver or drivers. After you select  
7
 
3. Troubleshooting (continued)  
the mouse driver, use your "Tab" key to select  
"Properties" and then press "Enter". Use your "Right"  
Arrow key to choose the "Driver" tab and then use your  
"Tab" key to choose "Update driver" or "Change Driver"  
and then press "Enter".  
The next options will vary from computer to computer  
because there are many types of Windows® 95/98 OS  
versions. The wording or options will be a little different  
but should be somewhat the same.  
Windows® will then continue to ask questions and help  
guide you through the changes. Use your "Arrow" Keys,  
"Enter", and "Tab" keys to continue through the process.  
Windows® may or may not start searching for Plug-and-  
Play devices right away and it may or may not find  
anything new. If it does not find anything new it will ask  
you another line of questions and if it does find something  
new choose something similar to "This Device is not in the  
list".  
Windows® will then ask if you want Windows® to search for  
a new device or will ask if you want to select a driver from  
a list. You will want to choose a device or driver from a  
list. Use your "Arrow", "Tab", and "Enter" keys to  
navigate and finish until the end of questioning. After  
finishing, Windows® may or may not ask you to reboot  
your computer. Yes, you will want to restart your  
computer. If it does not ask you to restart your computer  
you will have to close "System Properties". Use the "Tab"  
key until "Close" is selected and then press "Enter". Then  
8
 
3. Troubleshooting (continued)  
you will have to reboot your computer. Use your  
"Windows®"Key at the bottom left hand corner of your  
keyboard if you have one; if not, press "Alt + S". Then  
use the "Up" Arrow to select "Shut Down" and use  
your "Enter" key. Use the "Arrow" Key to select  
"Restart" and press "Enter".  
Q: Why does my external mouse not work with my  
laptop computer?  
A: You may have to disable the onboard mouse in order to  
use an external mouse. Try looking in your CMOS or  
BIOS in order to disable the onboard mouse. If you do  
not have this option or do not know how to get into  
your BIOS or CMOS, please follow the instructions in  
your computer manual or call the computer  
dealer/ technical support for your computer.  
9
 
4. How to use your mouse  
Get to know all of the options available to you  
When it comes to programming your middle button (the scroll  
wheel), it couldn't be any easier. On the bottom right hand corner  
of your screen, you will find a yellow box with an orange triangle  
in it. Click on this, then click "Open".  
Starting with the Universal Scroll section, you will be allowed to  
choose and restrict the direction your mouse can scroll. "X-Scroll"  
and "Y-Scroll" are already selected for you. This allows you  
to scroll left/right and up/down respectively. Clicking off the  
"X-Scroll" will make it so that you can scroll only up and down  
while clicking off the "Y-Scroll" will make it so that you can only  
scroll left and right. Clicking off both of them will disable the  
scrolling features of the wheel.  
The "Direction Reverse" field will reverse the direction that you  
scroll. By clicking it, if you depressed the wheel and moved your  
mouse to the left, you would scroll to the right.  
You are also able to choose between scrolling by lines or by  
pages. Choosing to scroll by page is usually recommended for  
larger documents that need to be browsed quickly.  
Speed will determine how quickly your screen will move when  
you activate the "Auto Browse" feature.  
"Auto Browsing" allows you to scroll automatically by clicking the  
wheel once. This will change the look of the pointer to a dot with  
four arrows pointing from it. Move the mouse in the direction that  
you wish to browse and the page will scroll in that direction.  
The further away you move from your original point, the faster  
the scrolling.  
10  
 
4. How to use your mouse (continued)  
From here, you can set how many lines per second you would like  
the browser to move. The higher the setting, the faster the  
scrolling action.  
"Zoom In" is measured by factors. The higher the factor, the  
farther in the zoom. The "Size" indicates how large of a window  
you have to view with.  
Your scroll wheel can be used for features other than scrolling.  
You can set it to "Left Button Double Click", "F1" through "F12",  
"Enter" Key, "Page Up" Key, "Page Down" Key, "Home" Key,  
"End" Key.  
To activate the settings that you chose, select "Apply".  
To keep your setting(s), select "OK".  
To keep your settings as they were before you opened the  
settings window, select "Cancel".  
Care for Your Mouse  
Maintenance of your MiniScrollerMouse is important. It is  
designed to provide years of trouble-free service. A self-cleaning  
ball cage helps prevent dust and lint from building up around  
the ball. However, if the pointer should skip or move abnormally  
on screen, we recommend you clean your mouse manually.  
a. First, turn the retainer ring counter clockwise to remove  
the ball  
b. Wipe the ball with a clean lint-free cloth  
c. Blow into the ball cage to dislodge any dust and lint  
If there is build-up on the rubber rollers inside the ball cage,  
clean using a cotton swab, lightly soaked with isopropyl alcohol  
to remove any debris.  
11  
 
5. Uninstall  
Removing the mouse software from your computer  
WARNING: To avoid damage, turn your computer off before  
plugging or unplugging any pointing devices.  
Windows® 95, Windows® 98 and Windows  
NT® 4.0  
First, it will be necessary to close the "Mouse Control Panel".  
Click the “Xbutton in the upper right hand corner of the  
"Mouse Control Panel" window. When asked if you are sure  
if you want to quit the "Mouse Control", click "Yes". Now  
you are ready to begin the uninstall process.  
a. Select "Start".  
b. Select "Settings".  
c. Select "Control Panel".  
d. Select "Add/Remove Programs".  
e. Select "Belkin Mouse Driver", then click "Add/Remove".  
f. You will be asked if you are sure if you want to remove  
"Browser Mouse" and all of its components. Click "Yes".  
g. The uninstall process will begin. Follow the on-screen  
instructions to complete the process.  
12  
 
Information  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220,  
declare under our sole responsibility that the product:  
F8E841-BLK  
to which this declaration relates:  
Complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may  
cause undesired operation.  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F8E841-BLK, to which  
this declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and  
with Generic Immunity Standard EN50082-1 1992.  
Belkin Components Limited Lifetime Product Warranty  
Belkin Components warrants this product against defects in materials and workmanship for  
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at  
no charge provided it is returned during the warranty period, with transportation charges  
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of  
purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse,  
or misapplication; if the product has been modified without the written permission of Belkin;  
or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,  
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS  
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER  
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME,  
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM  
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages  
or exclusions of implied warranties, so the above limitations of exclusions may not apply to  
you. This warranty gives you specific legal rights, and you may also have other rights that  
vary from state to state.  
 
be lkin.com  
Belkin Components  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Unit 13 • Gatelodge Close • Round Spinney  
Northampton • Northants • NN3 8RX • UK  
Tel: +44 (0) 1604678300  
Fax: +44 (0) 1604678330  
Belkin Components B.V.  
Diamantlaan 8 • 2132 WV  
Hoofddorp • The Netherlands  
Tel: +31 (0) 235698765  
Fax: +31 (0) 235612694  
© 2000 Belkin Components. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
 

Best Ventilation Hood CP35 Series User Manual
Black Box Network Hardware NBS008A User Manual
Blanco Indoor Furnishings 157 081 User Manual
Bosch Appliances Security Camera VEZ 400 User Manual
Bosch Appliances Smoke Alarm FMM325A User Manual
Bosch Power Tools Cordless Drill F 012 286 000 2860 User Manual
Bowers Wilkins Portable Speaker 7NT User Manual
Bush Hog Lawn Aerator 720 User Manual
Canon Scanner DR 1210C User Manual
Cary Audio Design Stereo Amplifier CAD 300 SEI User Manual