Belkin Network Card F5D5050 User Manual

USB10/100  
Ethernet Adapter  
Connect your PC to a network or broadband modem  
network  
F5D5050  
 
Table of Contents  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Installing the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Installing the Network Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5  
Connecting to a DSL or Cable Modem . . . . . . . . . . . . . . . . . . .6-13  
Creating a Simple Network . . . . . . . . . . . . . . . . . . . . . . . . . . .14-28  
Sharing an Internet Connection . . . . . . . . . . . . . . . . . . . . . . . .29-46  
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Warranty, FCC, CE Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
 
Introduction  
Congratulations on your purchase of this quality Belkin product.  
You can now enjoy the benefits of sharing printers and  
peripherals, exchanging data quickly between connected  
computers, and communicating via e-mail and the Internet. This  
guide explains how to install and use the Belkin USB 10/100  
Ethernet Adapter on a PC running Microsoft® Windows® 98, 2000,  
or Me operating system software.  
Features:  
Compatible with USB and Ethernet specifications  
Provides LED indicators for monitoring network traffic  
Contents of Package:  
One USB 10/100 Ethernet Adapter  
One CD-ROM  
User Guide  
1
 
Installing the Hardware  
Installing the USB 10/100 Ethernet Adapter  
1. Turn off the power to the desktop/laptop.  
2. Insert the USB 10/100 Ethernet Adapters USB Connector into  
the PCs USB port.  
3. Insert a CAT5 cable into the Ethernet jack.  
USB Ethernet  
10/100 Adapter  
PC  
to Ethernet Port  
Basic PC-to-Ethernet Port Connections  
An Ethernet port is used to connect the adapter to an Ethernet  
environment. Such a port might be an Ethernet hub, switch, network  
wall socket, peripheral device, etc.  
4. Use the following connection diagrams for your specific application:  
PC-to-PC Direct Connections  
NOTE: A standard Belkin Network Cable cannot be used to directly  
connect two computers. A specially wired cable called a crossovc  
cable is needed to allow you to connect 2 computers without the use  
of a network hub or switch. Belkin crossover cables are yellow  
(Belkin A3X126-XX-YLW-M)  
PC  
USB Ethernet  
10/100 Adapter  
PC  
Ethernet  
Cross-Cable  
2
 
Installing the Hardware (Continued)  
PC-to-Ethernet Network Connections  
Ethernet Switch  
PC  
PC  
PC  
USB Ethernet  
10/100 Adapter  
PC  
PC  
PC-to-Cable Modem or xDSL Modem Connections  
USB Ethernet  
Cable  
10/100 Adapter  
Modem  
PC  
3
 
Installing the Network Drivers  
Installing the network drivers  
Now that you have properly installed the USB 10/100 Ethernet Adapter  
and it is properly connected to the network, we are now  
ready to configure the software to allow your computers to work  
together efficiently.  
1. Turn on the power to the PC. Windows will automatically  
detect that a new device has been installed and will display  
the following window:  
2. The "Add New Hardware Wizard" will begin:  
3. Click the Next button.  
4
 
Installing the Network Drivers  
4. When asked, "What do you want Windows to do?" select the first  
option- "Search for the best driver for your device.(Recommended)"  
and click the Next Button.  
5. Select the CD-ROM drive box. Place the CD-ROM supplied with the  
card in your CD-ROM and click the Next Button.  
5
 
 
Connecting to a DSL or Cable Modem  
Many DSL or cable modems require connection to a computer through  
a network interface card (NIC). To determine if your cable or DSL  
modem can be connected through a network interface card, you can  
either consult your modems documentation or simply look at the ports  
on the back of the modem. If your modem has a port that looks just  
like the one pictured below (similar to a standard phone jack, but a  
little larger), then the Belkin USB 10/100 Ethernet Adapter is an easy  
way to connect to these modems and take advantage of high-speed  
Internet access.  
10/100Base-T Ethernet Connector  
Connecting the hardware  
To connect the modem to your Network Card, you will need an Ethernet  
"patch cable," or "CAT5 cable". Most cable and DSL modems will  
require connection using a "crossover patch cable," however, some  
modems offer a second network connector labeled "Computer," which  
can be connected to the Network Card using a standard patch cable. To  
determine which cable to use, it is recommended that you consult your  
modems installation guide or user manual.  
7
 
Connecting to a DSL or Cable Modem  
Belkin offers a full line of these cables, available from any major  
retailer or distributor of computer-related products. To achieve the  
best performance from your Cable or DSL modem, we recommend  
the following part numbers:  
Crossover Ethernet Patch Cable:  
A3X126-xx-YLW-M, where "xx" denotes the cable length in feet  
FastCAT5e Ethernet Patch Cable:  
A3L850-xx-yyy-S, where "xx" denotes the length, and "yyy"  
denotes the color of the cable  
To connect your DSL or cable modem to the computer, make sure  
you have first installed both the Belkin USB 10/100 Ethernet Adapter  
and its drivers as detailed earlier in this manual. Once the hardware  
and drivers are installed, plug one end of the Ethernet Patch Cable to  
the connector on the USB/Ethernet Adapter, and plug the other end  
into the connector on the modem.  
Configuring your computer  
Once the computer is connected to your DSL or cable modem, you  
will need to configure your computers network settings to access the  
Internet using the modem.  
Note: This section includes general instructions for configuring your  
computer to use a DSL or cable modem, which work for most  
DSL and cable service providers; however, some providers have  
special requirements or non-standard configurations. If your DSL  
or cable provider has provided instructions which differ from this,  
please follow those instructions. If the procedure below does not  
work for you, please contact your DSL or cable provider for  
instructions on configuring your computer to use the modem.  
8
 
Connecting to a DSL or Cable Modem  
When you use a DSL or cable modem, you are connecting to your  
service providers network. These networks can be set up by the  
provider to communicate with your computer using either "dynamic"  
or "static" addressing. To configure your computer, you will need to  
know which of these methods is to be used. If your provider intends  
for you to use "static" addressing, they should have provided you with  
several Internet addresses (labeled "IP address", "Net Mask", and one  
or more "DNS addresses"), each of which looks similar to the  
following: 192.168.0.1. If you did not receive numbers such as this in  
the paperwork or documentation accompanying your modem, your  
provider likely intends to use "dynamic" addressing.  
Using static addressing  
To access the Internet using  
static addressing, configure the  
network settings for your  
computer as follows:  
1. Open the Control Panel:  
click on the Start button,  
click on Settings, and  
choose Control Panel from  
the menu that pops out.  
2. Double-click on the  
Network icon in control  
panel to open the  
Network window.  
9
 
Connecting to a DSL or Cable Modem  
3. In the list of network  
components, click on the line  
that says:  
"TCP/IP -> Belkin USB  
Ethernet Adapter"  
4. Click on the Properties button  
to open the TCP/IP Properties  
window.  
5. Click on the IP Addresses tab.  
6. Select "Specify an IP address",  
and fill in both the "IP Address"  
and "Subnet Mask" fields with  
the numbers supplied by your  
service provider.  
7. Click on the DNS  
Configuration tab.  
10  
 
Connecting to a DSL or Cable Modem  
8. Select "Enable DNS".  
9. If your service provider has supplied a "Host Name" and/or  
"Domain", fill in these fields.  
10.For each DNS address your service provider has supplied, add the  
address in the "DNS Server" section.  
11.Click OK to close the TCP/IP Properties window.  
12.Back in the Network window, scroll through the list of network  
components. If "File and Printer Sharing for Microsoft Networks" is  
on the list, we strongly recommend removing it before using a  
DSL or cable modem connection. Using File and Printer Sharing  
makes it easier for other people on the Internet to access files on  
your computer without your knowledge or consent, with  
potentially harmful results. Check with your service provider for  
their own specific security recommendations.  
13.Click OK to close the Network window.  
14.Windows will ask you to  
restart your computer. Please  
do so.  
Once you have restarted your  
computer, do the following:  
1. Right-click on the "Internet  
Explorer" icon on your desktop  
to bring up its context menu,  
and select Properties.  
2. Select the "Connections" tab.  
3. Under "Dial-up settings",  
choose "Dial whenever a  
network connection is  
not present".  
11  
 
Connecting to a DSL or Cable Modem  
4. Click OK to close the window.  
You should now be able to open Internet Explorer and access the  
Internet at high-speed through your DSL or cable connection. If your  
browser is unable to connect to the Internet, please contact your  
service provider for further information.  
Using dynamic addressing  
To access the Internet using dynamic addressing, configure the  
network settings for your computer as follows:  
1. Open the Control Panel: click on the Start button, click on Settings,  
and choose Control Panel from the menu that pops out.  
2. Double-click on the Network icon in control panel to open the  
Network window.  
12  
 
Connecting to a DSL or Cable Modem  
3. In the list of network components, click on the line that says:  
"TCP/IP ->Belkin USB Ethernet Adapter"  
4. Click on the Properties button to open the TCP/IP Properties window.  
5. Click on the IP Addresses tab.  
6. Select "Obtain an IP address  
automatically."  
7. Click OK to close the TCP/IP  
Properties window.  
8. Back in the Network window, scroll through the list of network  
components. If "File and Printer Sharing for Microsoft Networks" is on  
the list, we strongly recommend removing it before using a DSL or  
cable modem connection. Using File and Printer Sharing makes it  
easier for other people on the Internet to access files on your  
computer without your knowledge or consent, with potentially  
harmful results. Check with your service provider for their own specific  
security recommendations.  
13  
 
Connecting to a DSL or Cable Modem  
9. Click OK to close the Network window.  
10. Windows will ask you to restart your computer. Please do so.  
Once you have restarted your computer, do the following:  
1. Right-click on the "Internet Explorer" icon on your desktop to bring up  
its context menu, and select Properties.  
2. Select the Connections tab.  
3. Under "Dial-up settings", choose "Dial whenever a network connection  
is not present".  
4. Click OK to close  
the window.  
You should now be able to  
open Internet Explorer and  
access the Internet at high-  
speed through your DSL or  
cable connection. If your  
browser is unable to connect  
to the Internet, please  
contact your service provider  
for further information.  
14  
 
Creating a Simple Network  
If you have two or more computers in your home or office,  
connecting them via a network lets you cooperate, collaborate,  
and make the most of your hardware. You can share files, printers,  
and even access the Internet from all of your computers through  
your network.  
While networking was once a complicated matter, Windows 95, 98  
and later versions, along with hardware like Belkin networking  
products have made networking very easy to do for everyone. The  
following section of this manual will help you set up a simple  
network in your home or office. If you are connecting to a larger,  
existing network, it is recommended that you consult your network  
administrator (the person who originally set up the network) for  
instruction on how to connect additional computers to the network.  
There is a wide variety of network hardware available, ranging from  
simple and inexpensive to very complex; however, for most home  
and small offfice network needs, the hardware required is basic.  
15  
 
Creating a Simple Network  
Connecting two computers:  
PC  
Tower  
PC  
Tower  
Connecting two computers simply requires each computer to  
have a Network Adapter, such as the Belkin 10/100 Ethernet Adapter,  
the Belkin Notebook Network CardBus Card for notebook computers,  
or the Belkin Desktop Network PCI Card for desktop computers.  
Simply connect the two Network Cards using a crossover Ethernet  
patch cable, such as Belkin part number:  
A3X126-xx-YLW-M, where "xx" denotes the cable length in feet  
16  
 
Creating a Simple Network  
Connecting three or  
more computers  
PC  
Tower  
PC  
Tower  
PC  
Tower  
Connecting three or more computers requires each computer to have  
a Network Adapter such as the Belkin 10/100 Ethernet Adapter, the  
Belkin Desktop Network Card for desktop computers, or the Belkin  
Notebook Network Card for notebook or laptop computers. You  
should also have a 10/100Base-T hub or switch, with enough ports  
for the number of computers you intend to connect immediately or in  
the near future. Hubs and switches are physically and effectively very  
similar; however, Belkin always recommends the use of switches  
when possible (such as the Belkin 5-port Network Switch part number  
F5D5130-5, or the Belkin 8-port Network Switch part number  
F5D5130-8). Switches offer much higher performance, efficiency,  
and speed than standard hubs.  
After installing the network cards, connect each computer to  
the switch using an Ethernet CAT5 patch cable, such as Belkin  
part number:  
A3L850-xx-yyy-S, where "xx" denotes the length, and "yyy"  
denotes the color of the cable  
17  
 
Creating a Simple Network  
Configuring your computers  
For each computer you connect to the network, you must set the  
network address to be used by other computers to communicate with  
this one. Follow these steps on each computer on the network to  
properly configure these settings:  
1. Open the Control Panel: click on the Start button, click on  
Settings, and choose Control Panel from the menu that pops out.  
2. Double-click on the Network icon in control panel to open the  
Network window.  
18  
 
Creating a Simple Network  
3. In the list of network components, click on the line that says:  
"TCP/IP -> Belkin USB Ethernet Adapter"  
4. Click on the Properties button to open the TCP/IP  
Properties window.  
5. Click on the IP Addresses tab.  
6. Select "Specify an IP address", and fill in the "IP Address" with the  
number 192.168.0.x, where "x" is a different number between 1  
and 255 for each of your  
computers.  
7. Fill in the "Subnet Mask"  
field with the number  
255.255.255.0  
8. Click OK to close the TCP/IP  
Properties window.  
9. Click OK to close the  
Network window.  
10. Windows will ask you to  
restart your computer.  
Please do so.  
19  
 
Creating a Simple Network  
Configuring network software  
In order for your network to be configured properly there are four  
network components that must be present. Client for Microsoft  
Networks, Belkin USB Ethernet Adapter, TCP/IP- Belkin USB Ethernet  
Adapter, and File and Printer Sharing for Microsoft Networks should  
be set up. The following are the steps to follow:  
1. From the Start menu go to Setting and select Control Panel.  
2. Double-click on Network and the following screen will appear:  
Note: There may be several other items listed, especially if your  
computer has a modem installed.  
20  
 
Creating a Simple Network  
3. Click on the Add button, the following screen will appear:  
4. Highlight Service on the list and press the Add button and select  
File and Printer Sharing for Microsoft Networks.  
21  
 
Creating a Simple Network  
5. If Client for Microsoft Networks does not appear in the Network  
Configuration screen, highlight Client on the list and once again press  
the Add button and the following screen will appear:  
6. Select Microsoft as the Manufacturer, and Client for Microsoft  
Networks, and press OK.  
7. After a few seconds  
the network  
configuration window  
will open again, press  
the Add button and  
add protocol if TCP/IP-  
32-Bit PCI Fast  
Ethernet Adapter is  
not present, this time  
select Microsoft as  
the Manufacturer,  
and TCP/IP and  
press OK.  
22  
 
Creating a Simple Network  
8. The Network window will now look something like this:  
9. The following network components should be installed:  
If all clients and protocols are not  
listed, press the Add button, and  
add the missing components.  
10.Press the File and  
Printer Sharing button  
and check both boxes,  
then press OK. The  
screen will now look  
something like this:  
23  
 
Creating a Simple Network  
11. Press the Identification Tab,  
and then enter the details for  
the three fields. In order to  
share files each PC must have  
its own unique name, but  
belong to the same workgroup.  
12. Press the Access Control  
tab, and set the access to  
share-level access control.  
Press the OK button.  
24  
 
Creating a Simple Network  
Sharing files and disk drives  
1. To share files and access to a hard drive, floppy drive, or CD-ROM  
with other computers on the network, open the My Computer  
window on the computer containing the files or drive you wish to  
share. RIGHT CLICK on the drive that you wish to share, then  
select Sharing from the menu that appears, and set the level of  
access that you want to allow.  
Accessing resources on other computers:  
1. To access resources available on other computers, click on the  
Network Neighborhood icon on your desktop.  
2. Double-click on the computer that you wish to access.  
3. You can now access all the files that are available to you on  
your network.  
25  
 
Creating a Simple Network  
Sharing a printer with the network  
1. To share a printer with other computers on the network open the  
My Computer folder.  
2. Double-click on the Printer folder, RIGHT CLICK on the printer  
that you wish to share, then select Sharing from the menu  
that appears.  
3. Select the Shared As button to enable sharing of this printer. (You  
may also want to assign the printer a meaningful name.) Select  
Not Shared to disable printing by other computers to this printer.  
Using a shared printer on the network  
1. To use a shared printer on another computer in the network open  
the My Computer folder.  
2. Double-click on the Printers folder.  
26  
 
Creating a Simple Network  
3. Double-click on the Add a Printer button and the following screen  
will appear, click Next.  
4. The screen will now look something like this. Select Network  
printer and click Next.  
27  
 
Creating a Simple Network  
5. The following screen will appear.  
6. Type the network path  
or queue name or click on  
the Browse button.  
You can browse to see all  
printers available to share  
on the network. Select the  
shared printer and follow  
the wizard prompts.  
28  
 
Creating a Simple Network  
7. After the printer is installed the following icon will appear in the  
printers folder showing a network printer is installed.  
29  
 
Sharing an Internet Connection  
Sharing a single Internet connection is one of the most useful  
advantages of networking your computers. Rather than having a  
modem, phone line, and perhaps even a separate Internet account for  
each of your computers, you can configure your network to allow all  
of your computers to share a single dial-up, DSL, or cable Internet  
connection. There are two ways to share an Internet connection,  
either by running Internet sharing software on a computer on the  
network which has a working Internet connection, or by using a  
special piece of hardware called a "Gateway".  
Software Internet sharing is appropriate for dial-up (normal phone  
line) Internet connections, as well as for DSL and cable connections  
which use either a modem which connects to the computers USB  
port, or a modem which goes inside of the computer. Software  
Internet sharing can be done through the Windows operating system  
if the computer which has the Internet connection is running  
Windows 98 SE, Me, NT 4.0., or 2000. If the computer with the  
Internet connection to be shared is running another operating system,  
third-party "proxy server" software is required.  
Hardware Internet sharing, which requires a Gateway (such as the  
Belkin Broadband Internet Gateway, part number F5D5230-X), is the  
best way to share DSL or cable Internet connections which use a  
modem connected to the Network Card in a computer.  
Once you have your network running properly, which can easily be  
verified by using Network Neighborhood to view the other computers  
on your network, and have a working Internet connection through a  
standard dial-up, DSL, or cable modem, setting up Internet  
connection sharing is simple.  
30  
 
Sharing an Internet Connection  
Hardware Internet sharing  
Sharing of a single broadband Internet connection using a Gateway  
is the most efficient and highest-performance way of sharing a DSL  
or cable Internet connection. In addition, most Gateways provide  
a basic level of security for your network, and include a built-in  
switch to add more ports to your network. In fact, full-featured  
Gateways such as the Belkin Broadband Internet Gateway (part  
number F5D5230-X) can be used either in place of, or in addition to,  
any existing network hub or switch.  
Cable or  
DSL line  
PC  
Tower  
PC  
Tower  
PC  
Tower  
Network using Gateway  
in place of switch  
For full information on installing a Gateway and configuring  
internet access using it, please consult the user manual supplied with  
your Gateway.  
31  
 
Sharing an Internet Connection  
Software Internet sharing  
If you have a working Internet connection on a computer running  
Windows 98 SE, Me, NT 4.0, or 2000, you can use the built-in  
Internet Connection Sharing capabilities of your operating system. On  
the computer which has the Internet connection follow these steps.  
Windows 98 SE host configuration  
1. Open the My Computer window.  
2. Double-click on the Control Panel  
and then double-click on  
Add/Remove Programs and press  
the Windows Setup tab and the  
following window will appear:  
3. Double-click on  
Internet Tools.  
4. Select the check box on the  
Internet Connection Sharing  
and click OK.  
32  
 
Sharing an Internet Connection  
5. Click Next and the following screen will appear:  
6. Click Next and the following screen will appear:  
7. Click Next again.  
33  
 
Sharing an Internet Connection  
8. When asked, "What type of connection do you use to access the  
Internet?" select the first option, "Dial Up Connection", and  
click Next.  
9. Internet Connection Sharing will now create a Client  
Configuration Disk to configure the browsers on the other  
computers on your home network to use Internet  
Connection Sharing.  
34  
 
Sharing an Internet Connection  
10. Click the Next button and the following window will appear:  
11. Insert a floppy disk into drive A and click OK.  
12. You have now successfully created the Client Configuration  
Disk to configure the browser on the other computers of your  
home network.  
Windows 98 SE host configuration check  
1. From the Start Menu go to setting  
and select Control Panel  
2. Double-click on Network and the  
following screen will appear:  
Note: There are now a lot more entries  
in the Network configuration.  
3. Change the Primary Network  
Logon to "Windows Logon".  
4. The Internet Connection Sharing  
setup made a modification to the  
binding of the TCP/IP protocol, the  
IP address has been changed to  
192.168.0.1. This will need to be  
changed to "Obtain an IP address  
automatically."  
35  
 
Sharing an Internet Connection  
5. Double-click on TCP/IP- Internet Connection Sharing and the  
following screen will appear:  
6. Click on "Obtain an IP address automatically" and click OK.  
Configuring client computers  
Now that you have successfully configured the host computer, we can  
set up other computers on your network to access a remote modem.  
1. Insert the Client Configuration disk into the A drive of the  
client computer.  
2. From the Start menu go to Run and enter A:\ icsclset.exe and  
click OK.  
36  
 
Sharing an Internet Connection  
3. The Browser Setup Wizard screen will appear. Click Next.  
4. The Wizard will now check the browser settings. Click Next.  
37  
 
Sharing an Internet Connection  
5. You have now completed the Browser Setup Wizard. Click Finish.  
Client configuration check  
To access the Internet using a Connection Sharing Computer, ensure  
that the TCP/IP settings for your  
network adapter are set  
correctly by carrying out the  
following steps:  
1. In the Control Panel, double-  
click on the Network icon.  
2. In the list of network  
components, click TCP/IP  
associated with the  
network adapter, and then  
click Properties.  
38  
 
Sharing an Internet Connection  
3. The following screen will appear. Select the "Obtain an IP address  
automatically" check box.  
4. Click the WINS  
Configuration tab, and  
then select the check box  
next to "Use DHCP for  
WINS resolution".  
39  
 
Sharing an Internet Connection  
5. Click the Gateway tab, and  
then remove any installed  
gateways if any are listed.  
6. Click the DNS Configuration  
tab, and then select the check  
box next to "Disable DNS".  
7. Click OK to accept the new  
TCP/IP settings.  
8. Click OK again to  
update your new  
network configuration.  
9. Any changes to the network  
configuration will require a  
restart of the system.  
40  
 
Sharing an Internet Connection  
Windows Me host configuration  
1. From the desktop, double-click on My Network Places and the  
following screen will appear:  
2. Double-click on the Home Networking Wizard and the following  
screen will appear. Click Next.  
41  
 
Sharing an Internet Connection  
3. The following screen will appear. Select Yes, if you use the Internet  
on this computer and select, "A direct connection to my ISP using  
the following device:" and select the device that you use to sign  
on to the Internet.  
4. You will now be asked if, "you want other computers on your  
home network to use the Internet connection on this computer."  
Select yes and the device that connects the host computer to your  
home network if you want to enable Internet Connection Sharing.  
Click Next.  
42  
 
Sharing an Internet Connection  
5. The following screen will appear, enter a computer name and a  
workgroup name and click Next.  
6. The following screen will appear. Select the check boxes if you  
want to share your files and printers with other computers on the  
network. Click Next.  
Note: To allow access to  
other resources on  
the computer that  
cannot be found in  
the screen above,  
double-click on My  
Computer. Right-  
click on the  
resources that you  
want shared and  
select sharing  
from the menu  
that appears.  
43  
 
Sharing an Internet Connection  
7. You will now be prompted to create a setup disk to enable the  
use of Home Networking in Windows 98 and Windows 95  
operating systems. To create a setup disk, select the first option  
and click Next.  
8. Insert a disk in the floppy drive and click Next.  
9. This completed the Home Networking Wizard, click Finish to have  
the Wizard make any of the changes.  
44  
 
Sharing an Internet Connection  
Configuring client computers  
1. Insert the Setup disk in the floppy drive of the client computer.  
From the Start menu go to Run and type, "A:\ setup.exe" and click  
OK. The screen will look something like this:  
2. This will bring you to the Welcome screen of the Home  
Networking Wizard. Click Next and the following window  
will appear:  
45  
 
Sharing an Internet Connection  
3. Select Yes, if you use the Internet on this computer and select, "A  
connection to another computer on my home network that  
provides direct access to my Internet Service Provider" and click  
Next. The following screen will appear:  
4. Be sure to change the Computer Name, but use the same  
Workgroup Name. Click Next. The following screen will appear:  
46  
 
Sharing an Internet Connection  
5. Select the check boxes to the corresponding resources you want to  
share with other computers on the network. Click Next.  
Note: To allow access to other resources on the computer that cannot  
be found in the screen above, double-click on My Computer.  
Right-click on the  
resources that you  
want shared and  
select sharing from  
the menu that  
appears and set the  
level of access that  
you want to allow  
and click OK.  
6. The following screen  
will appear:  
7. Select, "No" because we  
have already created a  
Home Networking Setup  
disk on the host computer.  
Click Next and this  
completes the client  
network configurations.  
47  
 
Product Specifications  
USB 10/100 Ethernet Adapter  
F5D5050  
Network Standards:  
Data Bus:  
IEEE 802.3, 802.3u  
USB  
Network Interface:  
Full Duplex:  
Female RJ45 jack  
10Mbps and 100Mbps  
Link/Activity  
LED Indicators:  
Driver Support:  
DOS, Windows® 98 and 2000  
48  
 
Warranty, FCC, CE Statement  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare  
under our sole responsibility that the product:  
F5D5050  
to which this declaration relates:  
Complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause  
undesired operation.  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F5D5050, to which this  
declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with  
Generic Immunity Standard EN50082-1 1992.  
Belkin Components Limited Lifetime Product Warranty  
Belkin Components warrants this product against defects in materials and workmanship for its  
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no  
charge provided it is returned during the warranty period, with transportation charges prepaid, to  
the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be  
required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or  
misapplication; if the product has been modified without the written permission of Belkin; or if  
any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,  
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY  
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES  
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY,  
INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO  
OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR  
USED WITH BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or  
exclusions of implied warranties, so the above limitations of exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights that vary from  
state to state.  
49  
 
Belkin Components  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Unit 13 • Gatelodge Close • Round Spinney  
Northampton • Northants • NN3 8RX • United Kingdom  
Tel: +44 (0) 1604678300  
Fax: +44 (0) 1604678330  
Belkin Components B.V.  
Boeing Avenue 333  
1119 PH Schiphol-Rijk  
The Netherlands  
Tel: +31 (0) 206547300  
Fax: +31 (0) 206547349  
Belkin Components, Ltd.  
7 Bowen Cresent • West Gosford  
NSW 2250 • Australia  
Tel: +61 (2) 4325 4666  
Fax: +61 (2) 4325 4277  
© 2001 Belkin Components. All rights reserved. All trade names are registered trademarks of  
respective manufacturers listed.  
 

Black Decker Stud Sensor PCS10 User Manual
Blomberg Washer WMT 8320 User Manual
Bogen Car Speaker HS7EZ User Manual
Bosch Appliances Home Security System D7212G User Manual
Bostitch Nail Gun N89C User Manual
Brainboxes Network Card UC 101 User Manual
Breckwell Indoor Fireplace P24FSA User Manual
Bretford Scanner UNI1 User Manual
Brother Sewing Machine 885 S61 User Manual
Casio Digital Camera EX Z1 User Manual