Belkin Switch P73965 User Manual

USB 2.0 Hi-Speed  
4-Port Hub  
User Manual  
P73965  
F5U224  
 
Introduction  
Please read this manual thoroughly and follow the  
procedures to prevent any damage to the 4-Port  
USB 2.0 Hub and/or to the connected devices.  
Congratulations and thank you for purchasing the Belkin  
4-Port USB 2.0 Hub (the Hub). The Hub provides four  
downstream USB ports that are compatible with both USB  
1.1 (low- and full-speed) devices, as well as with USB 2.0  
(high-speed) devices.  
This means that the Hub is “backward-compatible” with all of  
your current USB 1.1 devices and also works with the next  
generation of “high-speed” USB 2.0 devices. This may  
include such peripherals as scanners, printers, mass-storage  
devices, and high-resolution cameras. The Hub is  
self-powered, which allows the cascading of devices with  
additional hubs, so that up to 127 USB devices can be  
connected to a single port. The Hub also provides a  
multicolored status LED for each individual port, and a  
master power LED that indicates the Hub is powered and  
ready to use. For additional information, refer to the  
Technical Specifications” section.  
1
 
Features  
Compliant with Universal Serial Bus specification 2.0  
(data rate 1.5/12/480Mbps)  
Backward-compatible with Universal Serial Bus Specification  
1.1 (data rate 1.5/12Mbps)  
Compatible with Windows® 98SE, Me, 2000, and XP  
USB Implementers Forum (USB-IF) approval  
Plug-and-Play technology  
Support for “hot swapping” of USB devices  
Per-port over-current detection and protection  
Individual port-status indicator LEDs  
Four 480Mbps downstream ports  
Fully compatible with USB 1.1 and USB 2.0 devices  
Package Contents  
(1)  
(1)  
(1)  
(1)  
USB 2.0-compliant 4-Port Hub:  
F5U224  
USB Device Cable  
AC Power Adapter  
User Manual  
2
 
Technical Specifications  
Upstream Ports:  
(1)  
Downstream Ports:  
Per-Port Voltage:  
Per-Port Current:  
Power Mode:  
(4)  
DC +5V  
500mA (max.)  
Self-powered  
5°C~40°C  
-20°C~60°C  
Plastic  
Operation Temperature:  
Storage Temperature:  
Enclosure:  
Power Supply:  
Input: 120V AC  
Output: DC 6V 2.5A  
Plug Size: 5.5mm (outer)  
2.1mm (center)  
Plug Polarity: Center Positive  
3
 
Technical Specifications (continued)  
Main Power LED  
ColorDefinitions:  
Off  
Steady Red  
Not operational  
Operational  
Port-Status LED  
Color Definitions:  
Off  
Not operational  
Error condition  
Amber  
Steady Green  
Blinking Off/Green  
Blinking Off/Amber  
Fully operational  
Software attention  
Hardware attention  
4
 
Product Detail  
Figure 1  
Per-Port Status LED  
Power LED  
DC 6V 2.5A  
Power Jack  
Downstream  
Ports  
Upstream Port  
5
 
Hardware Installation  
1. Plug the AC adapter into a wall outlet or surge suppressor.  
Plug the DC connector into the DC power jack found on the  
back of the Hub (See Figure 1).  
2. Plug the USB-A cable connector into the downstream port  
of your computer, or downstream port of another hub.  
(See Figure 2).  
Important Note: The Hub must be connected to a USB  
2.0-compliant host in order to function in high-speed mode  
(480Mbps data rate). If connected to a USB 1.1-compliant  
host, the Hub will operate only in low-or full-speed mode  
(1.5/12Mbps).  
3. Plug the USB-B cable connector into the upstream port of  
the Hub (See Figure 3).  
4. Windows will now detect your Hub and install the necessary  
driver support. (The Windows “Install New Hardware  
Wizard” may prompt you to provide your Windows  
Installation CD to complete the driver installation process).  
5. Plug the USB-A connector of the USB device, or an  
additional hub, into any of the downstream ports of the Hub.  
(See Figure 4).  
6
 
Hardware Installation (continued)  
USB-A Connector  
Figure 2  
USB-B Connector  
Figure 3  
Port 1  
Port 2  
Upstream Port  
Port 3  
Port 4  
Figure 4  
7
 
Information  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220,  
declare under our sole responsibility that the product:  
F5U224  
to which this declaration relates:  
Complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may  
cause undesired operation.  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F5U224, to which this  
declaration relates, is in conformity with Generic Emissions Standard EN550022 1998 and  
with Generic Immunity Standard EN550024 1998, EN61000-3-2, and EN61000-3-3.  
Belkin Components Limited Lifetime Product Warranty  
Belkin Components warrants this product against defects in materials and workmanship for  
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at  
no charge provided it is returned during the warranty period, with transportation charges  
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of  
purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse,  
or misapplication; if the product has been modified without the written permission of Belkin;  
or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,  
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS  
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER  
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME,  
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM  
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.  
 
For technical support call  
800.223.5546  
x2263  
Belkin Components  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Unit 13 • Gatelodge Close • Round Spinney  
Northampton • Northants • NN3 8RX • United Kingdom  
Tel: +44 (0) 1604678300  
Fax: +44 (0) 1604678330  
Belkin Components B.V.  
Starparc Building • Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Belkin Components Ltd.  
7 Bowen Cresent • West Gosford  
NSW 2250 • Australia  
Tel: +61 (2) 4372 8600  
Fax: +61 (2) 4325 4277  
© 2002 Belkin Components. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
P73965  
 
 

Binatone Telephone CAPRICE 600 User Manual
Bissell Vacuum Cleaner 35401 User Manual
Black Box Network Hardware dtx5000 ctl r2 User Manual
Bogen CD Player CDC 3 User Manual
BRK electronic Smoke Alarm C05120BN User Manual
Brother Sewing Machine XL5000 User Manual
Bushnell Laser Level 201042 User Manual
Campbell Hausfeld Nail Gun IN180300AV User Manual
Canon All in One Printer MX492 User Manual
Cecilware Coffeemaker Cappuccino User Manual